KJ Works KP-13 Airsoft Replica Gun

Type: Blowback CO2 Airsoft Pistols.
Manufacturer: Distributed by KJ Works.
Model: KP-13.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Barrel: 3.7 inches (95mm) metal non-rifled.
Propulsion: Green Gas or Propane. 
Action: Semi auto blowback, SOA trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 24 round drop out full size metal magazine.
FPS: Claimed 366+.

Buy the magazine: KJ1098.

Trigger Pull: The trigger pull on the KJ Works KP-13 CO2 Blowback Airsoft Pistol is what you would expect for a true Single Action Only Trigger which is nice and light. There is a bit of take up but you can feel the point near the back where the release kicks in which is extremely predictable with no play in it. Of course you will need to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the work for you.

Accuracy: Starting with our power or velocity test we put 5 rounds through our Chronograph using standard .20 gram Airsoft Plastic BB’s. We were using a brand new CO2 and the temperature being around 21 degrees Celsius or 70 degrees Fahrenheit, so not too hot or cold. We did only test using the preinstalled internal non-extended barrel so if you do plan on using the longer extend barrel that the KJ Works KP-13 CO2 Blowback Airsoft Pistol comes with, you will more than likely get another 30-40 fps out of this Airsoft Pistol. That said we were able to get an average of 348 fps with our slowest shoot hitting 329 fps and my fastest shot hitting 363 fps. As expected the fastest shot was our first shot out of the Airsoft gun and our slowest shot was our last as the Airgun cooled down. We then moved on to my accuracy portion of the Field Test for the KJ Works KP-13 CO2 Blowback Airsoft Pistol. It did shoot rather high so we did have to aim at the bottom ring of the target to actually hit closer to the middle. It also shot just a tad to the left but not much so keep that in mind since the sights are not easily adjustable. Hop-up adjustments may lower the rounds a bit but it’s hard to say how much. The KJ Works KP-13 CO2 Blowback Airsoft Pistol did get close to a 1 inch 9 shot grouping (first shot was really high aiming at the bullseye), so that was impressive and the blowback feels solid with a really nice Glock like short and easy trigger.

Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so we expect the KJ Works KP-13 CO2 Blowback Airsoft Pistol to be just the same. From my initial first impressions everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.

Realism: The KJ Works KP-13 CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but yo could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 CO2 Blowback Airsoft Pistol so it should not set off any alarms over at Glock. We do like the two tone tan and black color scheme KJ Works went with for the KP-13 but if you like a more traditional look you can always go with the all black version.

Pros:

• Metal and Polymer with decent weight and good feel to it.
• Heavy Full blowback operation.
• Excellent fit and finish as always with KJWorks pistols.
• High capacity full size drops out metal magazine that holds the CO2 and 24 rounds.
• Well-hidden safety incorporated into the serial number under the barrel.
• Working trigger safety.
• Super easy to see in all conditions fiber optic sight up front.
• All working components like a real steel Glock styled pistol.
• Comes with extended barrel for higher velocity and easier import into Canada.
• Would make a good training weapon if you are used to using Glocks.
• Like the two tone finish, but can also get it in all black.
• Easily field strip-able.

Cons:

• Sights are not adjustable.
• Would have liked the addition of white outline on the rear sight.
• Slide spring could be slightly heavier.

Comments: If you’re looking for a pistol that is similar to a Glock for training purposes but is unique in its own way and doesn’t have to be a Glock, then perhaps the KJ Works KP-13 CO2 Blowback Airsoft Pistol may be for you. We like the fact that it has its own style to it and is not just another Glock or Glock Copy. We also like that the KP-13 comes with a CO2 magazine rather than a Green Gas Magazine which will get you a bit higher velocity and more mag fills before requiring to gas up again. We personally like the two tone version but get what you like best, it’s good to have options!