Type: Airsoft Pistol
Manufacturer: KJ Works
Model: KP-09 (CZ 75 Replica)
Materials: Metal slide & frame
Weight: 970 g (2.1 lbs)
Barrel: Metal, non-rifled, smoothbore
Power Source: 12 g CO2 x 1
Action: Semi-automatic, blowback, single and double action
Ammo Type: 6 mm airsoft BBs
Ammo Capacity: 24 rounds
Trigger Pull: The trigger pull on the KJWORKS KP-09 CZ 75 Airsoft Replica is surprisingly light in single action but incredibly sticky at first in double action. That said, you will not be shooting very often in double action unless you happen to de-cock the gun for some reason. At least you have the ability to shoot with the hammer down in double action when required. In single action, it took me a bit to get used to the very light trigger pull as I was letting some shots go off early.
Accuracy: I shot from 20 feet out in semi-rested position and got very satisfactory results. I was able to place 10 rounds under 2 inches almost getting a 1 inch group with the exception of one flyer. Shot placement was also well-centered but just a bit high which could easily be corrected by adjusting my aim point. It shot right around the 360 FPS range while conducting my 5 shot average chrony testing, right where this gun is supposed to be. I also got three full 24 round magazines worth of shots with a bit of CO2 left over for a partial mag, so this gun can easily get 75 shots out of a 12 gram CO2 - not bad at all for this style of full heavy blowback airsoft design.
Build Quality: I am extremely impressed with the build quality of pretty much all the KJ Works airsoft guns. The fit and finish is the best I have seen on any of my guns including my 4.5mm steel BB shooters. Even after shooting several magazines worth of BBs, the painted metal friction areas show very light wear which is not always the case with metal-built blowback airguns. There was some wear present within the ejection port but this is common even with real steel guns as metal on metal will wear down the finish. The tolerances between the moving parts like the slide and frame are very tight, showing excellent workmanship and machining.
Realism: The KJ Works KP-09 Airsoft Pistol is a replica of the real steel CZ 75 and is a great looking and functioning copy. You will not find actual licensing on this version and the CO2 magazine does stick out a bit to accommodate the 12 gram CO2 but other than that this pistol looks and works near exactly like the real McCoy and is fully field strippable. Even the safety operates just the same with safety available on half cock and full cock only.
Comments: The KP-09 is another wonderful full blowback airsoft pistol from KJ Works. The CZ 75 is a classic semi-auto pistol and deserves the attention to detail that this KJ Works version demonstrates. I found the CO2 usage to be very good considering the rather high 360+ FPS I was able to get with it. Top this off with high marks in the accuracy department and you have a real winner here. So if you're looking for a quality airsoft Replica of the classic CZ 75 that shoots straight and hard and looks and operates just like the real steel version then the KJ Works KP-09 should do just the trick for you.
Buy the magazine: KJ1024-MAG1
|Caliber:||6 mm (.24 cal)|
|FPS:||350 to 400|
|Body Type:||CZ 75|
|Primary Material:||Full Metal|
Based on 1 rating(s)
Have you used this product?
Rate it now.