Replica Air Guns


Customer Reviews for Umarex Colt Python 357 CO2 Steel BB Revolver

Brand: Misc

Type: BB air revolver
Manufacturer: Umarex.
Model: Colt Python 375
Materials: Almost entirely all Metal.
Weight: 2.75 pounds (1218 grams).
Barrel: 5.5 inches, metal non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 6 round cylinder.
FPS: 400.

Trigger Pull: The trigger pull on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is good in both single and double action, it’s nice that you have the shorter lighter single action trigger for slower more accurate shooting but you can also blast away in double action when you feel like it. The hammer on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is firm with not very much wiggle which some other revolvers in this category do have.

Accuracy: Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.

Build Quality: The Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver being mostly metal has a very good build quality and is on par with the Dan Wesson 715 shell loading revolver. It has a nice weigth adn balance to it and feels really good in the hand! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time compared to the black finishes found on most KWC made Airguns.

Realism: TheUmarex Colt Python 357 Magnum Chrome CO2 BB Revolver overall is a close copy a the real steel Colt Python 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that, this pistol is super close to the original Colt Python 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands and noise to be had.

Pros:

Shells loading revolver give you the feeling of loading and shooting a real revolver.

Mostly all-metal design.

Lots of detail, well made, chrome looks nice, not sure if it will wear better than the black finish found on most KWC made pistols?

Good overall weight, almost 3 pounds.

Should have good overall power, accuracy and shots per CO2 (based on my previous Colt Python testing).

Fully adjustable sights.

Well hidden CO2 Screw.

Recessed barrel.

Nice Trigger pull in both single and double action.

Cons:

Grips are a bit rough and wood grain is only OK.

Grips may be a bit large for people with small hands.

Decent enough Colt Python 357 replica but the frame is a bit long between the cylinder and the hammer.